The Ultimate Guide to Eljer Toilet Parts

If you’re a homeowner or a DIY enthusiast, knowing how to identify and replace toilet parts for Eljer toilets can save you time and money. With a rich history of quality and innovation, Eljer toilets have become a staple in many homes. However, like any appliance, they can run into issues that require replacement parts. Whether you’re dealing with a leaking flapper, a malfunctioning fill valve, or simply looking for a replacement seat, this guide will equip you with all the necessary information.

Types of Eljer Toilet Parts and Their Applications

Part Type	Description	Application
Fill Valve	Controls water flow into the tank	Replaces malfunctioning or old valves
Flush Valve	Releases water from the tank to the bowl	Used when toilets run continuously
Flapper	Seals the flush valve opening	Replaces worn-out flappers to prevent leaks
Tank Lever	The handle used to flush the toilet	Replaces broken or malfunctioning levers
Toilet Seat	The seat for user comfort	Replaces cracked or stained seats
Wax Ring	Seals the toilet to the floor	Used during installation or replacement
Supply Line	Connects the water supply to the toilet	Replaces old or leaking supply lines

Understanding Eljer Toilet Models

Eljer has produced various toilet models over the decades, and knowing your model is crucial for finding the right parts. Common series include the Titan, Diplomat, and Emblem. Each series may have unique specifications, so check under the tank lid or inside the tank for model numbers.

Identifying Your Eljer Toilet Model

1. Check the Tank: Most Eljer toilets have their model number printed on the inside of the tank lid or on a sticker inside the tank.
2. Consult Your Manual: If you have the original owner’s manual, it will often have the model number listed.
3. Plumbing Supply Websites: Sites like www.plumbingsupply.com offer identification guides and schematics for various Eljer models.

Common Issues and Solutions

1. Toilet Keeps Running

If your toilet doesn’t stop running after flushing, it could be due to a faulty flapper or flush valve.

• Solution: Check the flapper for wear and ensure it seals properly. If not, consider replacing it with a suitable one from www.korky.com.

2. Weak Flush

A weak flush might indicate a clogged flush valve or a malfunctioning fill valve.

• Solution: Inspect and clean the flush valve. If the fill valve is old, replace it for better performance.

3. Water Leaks

Leaks can occur due to worn-out seals, especially around the flapper or wax ring.

• Solution: Inspect all seals for damage and replace them as necessary. The wax ring can be found at www.guillens.com.

Technical Features of Eljer Toilet Parts

Part Type	Material	Compatibility	Average Lifespan	Typical Cost
Fill Valve	Plastic/Brass	Most Eljer models	5-10 years	$10 – $25
Flush Valve	Plastic/Brass	Model specific	5-10 years	$15 – $30
Flapper	Rubber/Plastic	Most Eljer models	3-5 years	$5 – $15
Tank Lever	Metal/Plastic	Most Eljer models	10+ years	$10 – $20
Toilet Seat	Plastic/Wood	Model specific	5-10 years	$20 – $50
Wax Ring	Wax	All toilets	5-10 years	$5 – $10
Supply Line	Rubber/Metal	Standard fittings	5-10 years	$5 – $15

How to Replace Common Eljer Toilet Parts

Replacing the Flapper

1. Turn Off Water Supply: Always start by shutting off the water to avoid any spills.
2. Remove the Old Flapper: Disconnect it from the chain and remove it from the flush valve.
3. Install New Flapper: Follow the reverse process to attach a new flapper. Ensure it’s seated properly to create a good seal.

Replacing the Fill Valve

1. Turn Off Water Supply: Again, begin by turning off the water supply.
2. Drain the Tank: Flush the toilet to empty the tank.
3. Remove the Old Valve: Disconnect the supply line and unscrew the old valve from the tank.
4. Install New Valve: Follow the manufacturer’s instructions for installation. Ensure all connections are tight to prevent leaks.

Replacing the Toilet Seat

1. Remove Old Seat: Unscrew the bolts holding the seat in place.
2. Install New Seat: Align the new seat with the holes and secure it with the provided screws.

Related Video

Conclusion

Understanding Eljer toilet parts and their applications is essential for any homeowner facing plumbing issues. From fill valves to flappers, knowing how to identify and replace these components can save both time and money. Always refer to your model’s specifications and consider reliable sources like www.plumbingsupply.com for guidance and parts.

FAQ

What is an Eljer toilet?
An Eljer toilet is a brand of toilet known for its durability and efficiency. They offer a variety of models suitable for different needs and preferences.

Where can I find Eljer toilet parts?
You can find Eljer toilet parts at various online retailers such as www.plumbingsupply.com, www.korky.com, and www.guillens.com.

How do I know which parts to replace?
Identify the issue first; common problems include running toilets, weak flushes, or leaks. Consult your model’s manual or look online for troubleshooting guides.

How often should toilet parts be replaced?
Typically, flappers and fill valves should be replaced every 3-10 years, depending on usage and water quality.

What tools do I need to replace toilet parts?
Common tools include a wrench, pliers, and a screwdriver. For some installations, a bucket and towels may also be handy.

Can I replace toilet parts myself?
Yes, many toilet parts can be replaced by homeowners with basic tools and some instructions. However, if you’re unsure, consider hiring a professional.

What should I do if my toilet still leaks after replacing parts?
If leaks persist, check the installation of the new parts. Ensure seals are tight and not damaged. If issues continue, consult a plumber.

Are Eljer parts compatible with other brands?
Some Eljer parts may be compatible with American Standard parts, as they are under the same parent company. Check specifications before purchasing.

Where can I find installation guides for Eljer toilet parts?
Installation guides can be found on manufacturer websites such as www.plumbingsupply.com or in the product packaging of the parts.

What is the average cost to repair an Eljer toilet?
Costs can vary widely based on parts needed, but expect to spend anywhere from $50 to $200 for parts and potential labor if hiring a plumber.